The Formation of the Aquarium

  First, it is necessary to determine the place where it will be in your aquarium. This should be a visible place adjacent to the wall, but not to the window. Excessive amounts of sunlight will create expansion algae. However, if you are able to set up an aquarium at such a place that gets in the afternoon and the sun's rays for up to 3 hours, do it. This quality brightness will significantly affect the growth of plants, and with regular maintenance of the aquarium, When you specify a city aquarium on the shelf foreseen for this, first set the dimensions of the piece of Styrofoam bottom of the aquarium, you set up an aquarium. This appears to be due to prevent splashing glass on impact against a hard surface.

What you necessary equipment for the functioning of the aquarium:
-Filter (External, internal biosafety, canister, hanging, floor, roof, ...)
-Filter material
- mechanical filtration
sponge with large porama- which will create useful bakterije- biological filtration
activated carbon / zeolite / ceramic rings - chemical and biological filtration)
-Heater
-Pump + Air hose, diffuser
-Thermometer
 -substrate (sand, quartz gravel, clay beads, perlite, ..)
-lamps

In the first setting up an aquarium substrate.
To plant aquariums part of the substrate should be nutritious and so sets of 2-3 or more layers.
Once a substrate followed by filling the tank with water. At the bottom of the tank is placed bowl / plate on which directs a jet of water to the water flowed evenly and not to raise the substrate.
When you fill the tank with water, place the heater, filter and other equipment and turn. Heater set at about 24C (unless you keep some fish with special temperature requirements, eg Discus)

At this stage you can start planting the plants. From this phase begins and the cycling of the aquarium, which is often skips choice to which later the majority of living creatures-fish, shrimp, snails-dying.